Apple Iphone 5C compatible charging dock and headphone jack View larger

Loading dock and plug headphones audio compatible Apple iPhone 5 c

PMFR5128

New

And a loading dock headphone audio Apple Iphone 5 c.

More details

In stock

20,03 € tax incl.

Videos

Data sheet

For what type of breakdown? Typical charge connector problem: The phone does not charge and the notification LED does not turn on when I plug it in, but the phone will start normally if the battery is charged.

More info

Change the connector to charge an iPhone 5 c

This spare part for iPhone 5 c will allow you to replace the following: connector of load, the microphone, the antenna network and the Jack. You can't charge your iPhone 5 c? You experience problems when syncing your iPhone 5 c with iTunes? The technicians of pieIt-mobile offer this video to explain How to replace the charge connector or dock on an iPhone 5 c connector. Our set of opening Tools special iPhone 5 c consists of the following tools:

  • 1 flat screwdriver
  • 1 Philips screwdriver
  • 1 screwdriver replacement
  • 2 opening plastic levers
  • 2 picks of the opening
  • 1 suction extraction

Drop the screen of your iPhone 5 c block < /.H3 >

  • Please turn off your device before you proceed to the < strong >replacement of the connector to charge your iPhone 5 c (dock).
  • Remove the 2 screws located around the charge your iPhone 5 c connector a screwdriver replacement.
  • Paste a sucker of extraction just above the < strong >home button of your iPhone 5 c then gently pull upward to lift the block screen. < /span >
  • Open it Block 5 c iPhone display vertically as if you open a book then remove the 4 Phillips head screws that hold the metal plate protecting the layers of the screen.
  • Use your plastic spatula to remove the protection plate.../ span >
  • Disconnect the water. proximity sensor and the camera face time
  • Disconnect the water of the touchscreen glass using your spatula in plastic. < SPyear >
  • Disconnect the water of the LCD screen of the < strNGO >motherboard of your iPhone 5 .
  • Once the 3 layers has been disconnected, you can file the < stRong >Block 5 c iPhone display safe. < /span >

Remove the battery of your iPhone 5 c

  • Remove the 2 Phillips screws that are used to keep the metal cover of the battery connector. < /span >
  • Gently pry on the battery connector to disconnect the card mother.
  • Remove the your iPhone 5 c battery of its location as shown on the video. < /span >

Replace the connector to charge your iPhone 5 c

  • Using your screwdriver, remove the 7 screws that hold the < strong > speaker ringtone to your iPhone 5 c frame.
  • Disconnect the coaxial cable to the antenna GSM card mother.
  • Remove the metal plate that keeps the < strong >Speaker of your iPhone 5 c.
  • PRY gently using your spatula to extract the speaker from its location on the frame.
  • Using a plastic spatula, gently pry on the tablecloth of the charge your iPhone 5 c connector in order to disconnect it.../ span >
  • Reuse your plastic spatula to take off the tablecloth of the connector to load chassis.
  • This is! The < strong >charge your iPhone 5 c connector is now filed. You can replace it with another brand new purchasable on our shop online.
  • Follow our tutorial in the opposite direction for the < strong > reassembly of your iPhone 5 c.

Those products may also interest you


Accessories

Delivery Date

Order before 14 h

for delivery between 20/04 and the 23/04/24

Approximate date using Suivi GRATUIT moreInfo
Close