Button home with tablecloth assembled Apple Iphone 4s white View larger

Home with tablecloth Assembly compatible Apple iPhone 4S white button

PMFR5341

New

White home with tablecloth meeting Apple Iphone 4S button

More details

This product is no longer in stock

4,38 € tax incl.

Videos

More info

Replace the home button with slick iPhone 4S < /.H2 >

The home button of your iPhone 4S no longer works or becomes less and less effective? You want to fix it yourself, but you do not know how? The problem probably comes from the water which manages the operation of the home button on your iPhone. The following tutorial will show you How to replace the water of the home on your iPhone 4S button. For this, you will need a new < strong >slick button man for iPhone 4S (available on our shop) as well as a < strong >opening tools set special iPhone 4 and iPhone 4S .    

  • 1 flat screwdriver
  • 1 Philips screwdriver
  • 1 screwdriver replacement iPhone 4 / 4s
  • 2 opening plastic levers
  • 2 picks of the opening
  • 1 suction extraction

Removal of the back cover of the iPhone 4S < / h3>

  • Before proceeding to the replacement of the water and the home button of your iPhone 4Smake sure that it is actually turned off. For that you have to press the power button for a few seconds.
  • Remove the SIM in your iPhone 4S rack using a juicer or a trombone.
  • Use your replacement screwdriver to unscrew the two screws on part and on the other connector load. < SPyear >
  • Slide back cover of your iPhone 4S upward to uncouple her.../ span >
  • The back cover of your iPhone.facilities > is now filed.

Removing the battery of iPhone 4S

  • Unscrew the 2 screws that hold the plate protecting the connector of the battery.
  • Using a plastic spatula, disconnect it, stroNG >Connector of the battery of your iPhone 4S.
  • Pull the plastic tab to take off the battery of your iPhone 4S chassis. Use lever using your spatula plastic in case the battery detaches.
  • The your iPhone 4S battery is completely peeled.

Removal of the motherboard of iPhone 4S < / h3>

  • Unscrew the 2 screws that hold the plate to the dock connector using your screwdriver. Don't forget to get this metal plate using your pliersTTE.
  • Now, to reuse your plastic spatula to disconnect the < strong >Connector of the iPhone 4S charge < /.strong >.
  • Unscrew also the 4 screws that hold the metal cover protecting the connectors. Use your pliers to make this cache metal.
  • Reuse your plastic spatula to disconnect the connector of the camera back to the card mother.
  • Remove the module from the rear camera from your iPhone 4S < /.strong >.
  • Unplug the taken water Jack-vibrator-buttons volume of the motherboard. Disconnect then the tablecloth of the proximity sensor and power button.
  • Disconnect the water to the front camera on your iPhone 4S using your spatula in plastic.
  • Disconnect the water of the LCD of the card mother.
  • Also disconnect the water from the glass touch. < /span >
  • Using your screwdriver, remove the screw that holds in place the protection plate from the antenna Wi - Fi then drop this plate as shown in the video.
  • Still using your plastic spatula, remove the < strNGO >Wi - Fi and Bluetooth of iPhone 4S antenna < /.strong >.
  • Disconnect the coaxial cable to the antenna GSM card mother.
  • Unscrew the Phillips head screws that hold the motherboard to the chassis.
  • Carefully lift the your iPhone 4S motherboard in order to deposit it.../ span >

Removal of the full screen of iPhone 4S

    • Remove the leg of mass (golden color) located below the card mother.
    • Take him off.strong > your iPhone 4S vibrator the chassis by gently levering by using your spatula.
    • Unscrew the 6 screws used to fix the < strong >block screen of your iPhone 4S . The screws in question are located on each side of the frame. < SPyear >
    • Still use your screwdriver to unscrew the 2 screws holding the speaker ringtone to your iPhone 4S .
    • Drop the ringtone speaker using your pliers of precision.
    • Slide your spatula between the LCD and the chassis as shown in the video, then gently pry to separate both compartments.
      • < li >

This is! The < strNGO >full screen of your iPhone 4S is totally dismantled. < /span >

Replacement of the home with tablecloth for iPhone 4S button

  • Disconnect the connector of the water of the home button using your plastic spatula. Once disconnected, use your precision clamp to drop this tablecloth.
  • Reuse your spatula to take off the home button and then drop it using a pair of tweezers.
  • The tablecloth and the home button of your iPhone 4S are now filed. You can replace them with new parts in case of need. < SPyear >
  • There now follow the repair upside guide to < stRong >back up your iPhone 4S.

Those products may also interest you


Accessories

Delivery Date

Order before 14 h

for delivery between 26/04 and the 29/04/24

Approximate date using Suivi GRATUIT moreInfo
Close