LCD screen with touch screen for iPhone 4S

PMFR779

New

Full display module: LCD display with touch screen for Iphone 4S

More details

In stock

25,99 € tax incl.

Videos

Data sheet

Pre-gluing of the glass: No: Not systematic: It is necessary either to recover the old one, or to buy adhesive "quarter rolls 2mm"
For what type of breakdown? Typical LCD or touch-sensitive problems: Display fault, black screen, image with faults. Touch problem, touch that does not respond or wrong. Screen that stays fixed on the logo at startup. Impossible to type or type anything.

More info

55Dispersedness of the repair: 2.5 / 5

Product Overview

A full screen for iPhone 4S consists of:

A touch screen: Glass that reacts to the touch

An LCD screen : Screen for displaying images

A chassis : Allows to fix the screen easily on its support

A ringFor front camera

A protective gridFor loudspeaker

A polarizing filmWith touch technology

To know: The home button is not included in this room

What's more,/ H3>

Technology: Retina LCD display

<compatibility/ Strong>: Only Iphone 4S

For what problems?

  • Broken or cracked touch screen
  • Tactile function no longer responding (in some places or completely)
  • LCD screen black
  • LCD screen white
  • LCD display with color bands
  • LCD display with tasks
  • Missing Pixels

Expert advice for successful repair

See the tutorial videos

Have the right tool set for your phone

Free services included

  • 2-year parts warranty
  • Free shipping (in Metropolitan France and outside Colissimo and Chronopost)
  • Same day shipping if order before 3pm
  • Tracking your order
  • Customer satisfaction tracking

Tutorial Replacement Full Screen for iPhone 4S Black

Remove the back cover of the iPhone 4S

  • Before proceeding to the Replacement of the full screen of your iPhone 4S , Make sure it is turned off. Be sure to remove the SIM rack with an extractor or paper clip.
  • Unscrew the two pentalobes screws located on each side of the load connector.
  • Slide the back cover upwards until it moves approximately 2mm. Once untied, you can drop the cockUe back of your iPhone 4S.

Remove the battery from the iPhone 4S

  • Unscrew the 2 Phillips screws that hold the battery connector to the motherboard.
  • Disconnect the IPhone 4S battery connectorUsing a plastic spatula.
  • Pull the plastic tab as shown in the video to Remove the battery of your iPhone 4S. Be careful when removing the battery with this tab./ Li>
  • Here ! The Battery of your iPhone 4SIs now filed.

Drop the iPhone 4S motherboard

  • Unscrew the 2 Phillips screws holding the insertOf the dock connector. Once unscrewed, retrieve this plate with your precision pliers.
  • Now, reuse your plastic spatula to disconnect the IPhone 4S Charging Connector .
  • Unscrew the 4 Phillips screws securing the metal cover that protects the connectors. Use your precision pliers to remove the metal cover.
  • Disconnect the connector from the rear camera on the motherboard. Once disconnected, place the Rear camera of your iPhone 4S By means of a clamp.
  • Disconnect the jack jack plug, vibrator button, and volume buttons on the system board.
  • Also disconnect the Proximity sensor and power button on your iPhone 4S .
  • Always using your plastic spatula, disconnect the front panel camera.
  • Disconnect the LCD panel and the touch panel glass from the motherboard.
  • Remove the Phillips screw that secures the Wi-Fi antenna cover plate. Use your precision pliers to remove the metal plate.
  • Re - use your plastic spatula to disconnect the " Wi-Fi antenna and Bluetooth of the iPhone 4S .
  • Disconnect the GSM antenna connector from the motherboard.
  • Using your Phillips screwdriver, remove the screws that hold the motherboard to the chassis.
  • You have decidedOnnect all the tablecloths? Lift the IPhone 4S motherboard By gently levering with your plastic spatula.

Remove the full screen of the iPhone 4S

  • Remove the ground tab (gold-colored) on the underside of the motherboard as shown on the video.
  • Gently lever on the Vibrator of your iPhone 4STo detach it from the chassis.
  • Unscrew the 6 screws located on each side of the chassis and used to hold the Block screen of your iPhone 4S . Also unscrew the 4 Phillips screws on the 4 sides of the unit.
  • Remove the 2 screws that hold theIPhone 4S Ringtone Speaker Using your Phillips screwdriver. Once unscrewed, use your precision pliers to remove the loudspeaker block.
  • Insert a plastic spatula between the LCD screen and the chassis and then gently lever to separate them. Make as shown on the video file to the SchoolsRan full of your iPhone 4S.

Replace the full screen of the iPhone 4S

  • The Full screen of your iPhone 4S Is ready to be deposited. Retrieve the home button and be careful not to damage any tablecloth by passing them through the slot of the chassis.
  • Here ! You can To replace the defective full screen of your iPhone 4S blackBy another brand new.
  • Now you just have to follow the instructions in this tutorialRemount your iPhone 4S.

Delivery Date

Order before 14 h

for delivery between 29/03 and the 01/04/24

Approximate date using Suivi GRATUIT moreInfo
Close