Array
Dock charging Iphone 4S white View larger

Dock charging iPhone 4S white

PMFR781

New

Charging dock for Iphone 4S white

More details

In stock

13,43 € tax incl.

Videos

Data sheet

For what type of breakdown? Typical charge connector problem: The phone does not charge and the notification LED does not turn on when I plug it in, but the phone will start normally if the battery is charged.

More info

Change the dock connector of an iPhone 4S white

You're having problems loading your iPhone 4S or syncing with iTunes? You want Repair the dock connector (charging connector) of your iPhone 4S ? This Dock connector for iPhone 4 whiteWill solve all your problems. The mobile-pieceYou will find this repair guide very detailed to explain how Replace the dock connector of your iPhone 4S white. All the necessary tools for dismantling your device are available in our Special opening tool set iPhone 4 / 4S .

  • 1 Flat Screwdriver
  • 1 Philips screwdriver
  • 1 Pentalobe iPhone 4 / 4S Screwdriver
  • 2 plastic opening levers
  • 2 opening picks
  • 1 extraction suction cup

First step: removal of the rear window

  • Switch off your device before changing the dock connector on your iPhone 4S. Be sure to remove the SIM card reader by inserting a paper clip into the eject hole.
  • Unscrew with the Phillips screwdriver the two screws around the IPhone 4S Dock Connector .
  • Slide the rear window upwards to disengage it. Do not forget to switch to vibrate mode to Remove the rear window of your iPhone 4S .
  • The rear window of your iPhone 4S is finally filed.

Step Two: Removing the Battery

  • Unscrew the metal plate attached to the battery connector using a Phillips screwdriver. Once the two screws have been removed, remove this metal plate using a precision pliers.
  • Disconnect the IPhone 4S battery connectorUsing a plastic spatula.
  • Here ! The Battery of your iPhone 4SIs now disconnected. Pull the plastic tab out of the metal chassis. If the battery is strongly bonded, leverage with your plastic spatula to remove it.

Step Three: Replace the dock connector

  • TheIPhone 4S Dock Connector Is protected by a metal plate. Use a tourneviS cruciform to unscrew this plate then recover it with a tweezer.
  • Use the tip of your plastic spatula to disconnect the Dock connector (charging connector) of your iPhone 4S.
  • Reuse your spatula to disconnect the coaxial cable from the GSM antenna on the motherboard.
  • Unscrew the Phillips screws used to secure the IPhone 4S Ringtone SpeakerThen use a precision pliers to remove it.
  • Using your Phillips screwdriver, remove the 2 screws that hold the Your dock connectorIPhone 4S. Once unscrewed, peel off the dock connector from the chassis using a plastic spatula.
  • Open the latch of the home button with your plastic spatula then gently remove the tablecloth.
  • Re-use your plastic spatula to remove the rubber from the microphone.
  • Now gently peel off the Dock connector for your iPhone 4SOf the chassis. Once removed, you can replace it with a dock connector of the same quality available on our shop.
  • You have succeeded in Replace the dock connector of your iPhone 4S? Just follow the tutorial in reverse order forRemount your iPhone 4S.Raise the connector latch on the HOME ribbon.

Those products may also interest you


Accessories

Delivery Date

Order before 14 h

for delivery between 25/04 and the 28/04/24

Approximate date using Suivi GRATUIT moreInfo
Close