Dock charging Iphone 4S black View larger

Dock charging iPhone 4S black

PMFR782

New

Charging Dock for Iphone 4S Black

More details

In stock

13,43 € tax incl.

Videos

Data sheet

For what type of breakdown? Typical charge connector problem: The phone does not charge and the notification LED does not turn on when I plug it in, but the phone will start normally if the battery is charged.

More info

Changing the dock connector of an iPhone 4S

Is your iPhone 4S no longer loading or experiencing transfer concerns when synchronizing with iTunes? Is your iPhone 4S no longer broadcasting sound in earphones? Can not you hear yourself in a telephone conversation? You wantRepair the dock connector of your iPhone 4S yourself?We offer this tutorial to explain how Replace yourself and safely dock connector of your iPhone 4S . This operation requires a new charging dock for iPhone 4S black as well as a Special opening tool set iPhone 4S Which comprises:/ Span>

  • 1 Flat Screwdriver
  • 1 Philips screwdriver
  • 1 Pentalobe iphone 4 / 4S screwdriver
  • 2 plastic opening levers
  • 2 opening picks
  • 1 extraction suction cup

Remove the battery from the iPhone 4S

  • BeforeDisassemble your iPhone 4S , Make sure it is turned off.
  • Remove the two 3.6 mm "Pentalobe" screws around the dock connector. Apple has recently replacedThe two Phillips screws with screws.
  • Slide theRear window of your iPhone 4S to the top. (The glass will move about 2 mm).
  • Gently lift the Rear window of your iPhone 4S .
  • Use a Phillips screwdriver to remove the fastening screws that holds the battery connector to the motherboard.
  • Use a plastic opening lever to lift the ConnectorIPhone 4S battery .
  • Use the plastic pull tab to release the iPhone 5's battery from its slot.

Drop the iPhone 4S motherboard

  • Use a SIM card extractor or paper clip to eject the SIM card and its holder.
  • Unscrew the 2 Phillips screws that hold the metal bracket protecting the IPhone 4S dock connector padTo the motherboard.
  • Use a plastic opening tool to loosen the pad from the load connector on the motherboard.
  • Reuse your plastic opening tool to take off the tableclothGlued to the motherboard.
  • Disconnect the coaxial cable from the " GSM antenna of your iPhone 4S.
  • Remove the 5 screws that hold the plastic cover from the connectors to the motherboard.
  • Lift the connector cover by levering it with your plastic tool.
  • Carefully remove the rear camera connector from your iPhone 5.
  • Remove the 2.4 mm Phillips screw located under the thumbnail.

Disconnection of the sheets

  • Disconnect the LCD panel from the LCD.
  • Disconnect the nappa from the touch screen./ Span>
  • Disconnect the Socket jack, volume and vibrating buttons of the iPhone 4S.
  • Disconnect the IPhone 4S microphone and power button .
  • Disconnect the table from the Front Camera iPhone 4S .
  • Remove the screw that is next to the headphone jack.
  • Now, carefully remove the motherboard from the iPhone being careful not to get stuckThe cables.

Remove the speaker block from the iPhone 4S

  • Remove the Phillips screw that secures theIPhone 4S Speaker BlockTo the chassis.
  • Carefully IPhone 4S Speaker Block.

Remove the iPhone 4S dock connector

  • Using your Phillips screwdriver, remove the 2 screws that hold the IPhone 4S Dock Connector To the chassis.
  • Carefully peel off the dock connector from the iPhone 4 dock connector on the chassis.
  • You can now remove the Charging connector for your iPhone 4.

Replace the dock connector of the iPhone 4S

  • Once your defective dock connector is removed you can replace it with another brand new one.
  • After replacing your dock connector, you only have to Remount your iPhone 4S. To do this, simply reproduce the steps in this tutorial in reverse.

Those products may also interest you


Accessories

Delivery Date

Order before 14 h

for delivery between 20/04 and the 23/04/24

Approximate date using Suivi GRATUIT moreInfo
Close