Compatible black touch screen Wiko Cink Peax 2 View larger

Wiko Cink can 2 black compatible touch glass

PMFR5598

New

Glass touch compatible black Wiko Cink can 2

More details

In stock

16,39 € tax incl.

Data sheet

Pre-gluing of the glass: Yes: No need for adhesive most of the time
For what type of breakdown? Typical Touch Problems: Touch sensitivity fault, the keypad does not respond but the picture works well, can not enter the PIN code, screen that remains frozen on the logo when starting.

More info

Replace the glass of a Wiko Cink can 2 < /.H2 >

You will find on room-mobile all the spare parts for < /stRong >WIKO Cink can 2. This touch for windows WIKO Cink can 2 black help refurbish your Smartphone. If you want to of < strong >replace the touchscreen glass cracked your Wiko Cink can 2 the following repair guide will certainly help you.

Equip yourself with necessary tools for repair and carefully follow our tutorial so that you can change yourself touch your Wiko Cink can 2 window.

Removal of the internal frame of the Wiko Cink can 2 < /.H3 >

  • It is strongly recommended to turn off your Wiko Cink can 2 prior to the replacement of its glass touch.
  • To have access to the < strong >battery of your WIKO Cink can 2, you must first remove the back cover.../ span >
  • Once the back cover of the Wiko Cink can 2 removed, use your plastic opening tool to pry the battery in order to release it from its housing. Don't forget to remove the SIM card and the card of their locations.
  • Unscrew the 8 screws that maintainingbecome the internal chassis of the Wiko Cink can 2 . The latter is the support of protection that protects the motherboard.
  • Unclip the internal chassis of your Wiko Cink can 2 then slide your tool plastic along the gap to separate it from the rest of the device.

Removal of the motherboard of the Wiko Cink can 2 < /.H3 >

  • Reuse your plastic opening tool to disconnect the water of the touch of the card mother.
  • Then disconnect the water of interconnection that connects the motherboard to the < stroNG >bottom of the Wiko Cink can 2 management card.
  • Now, disconnect the water of the < stRong >LCD screen the motherboard.
  • Also disconnect the water of the < strong >rear camera of the Wiko Cink can 2 < /.strong >.
  • Finally, disconnect the coaxial cable of the < strNGO >your Wiko Cink can 2 GSM antenna.
  • You can now file the < strong >motherboard of your Wiko Cink can 2 safe. < /span >

Removal of the management of the bottom card./H3 >

  • Disconnect the water of the camera face time of Wiko Cink can 2 m cardera.../ span >
  • Heat the module to the rear camera using a heat gun then gently pry to deposit it.
  • Disconnect the water of interconnection of the map down.
  • Reuse the heat gun to heat the white sticker Wiko then take off chassis ground located just below. < SPyear >
  • Heat the bottom of your Wiko Cink can 2 management card and gently pry to drop. < /span >
  • This is! The < strong >map of the bottom of the Wiko Cink can 2 management is finally dismantled. < /span >

Change of the glass of the Wiko Cink can 2

  • Heat the water to touch to avoid damage in her taking off of the frame.
  • Always using the heat gun, heat the upper part of the < strong >glass of your Wiko Cink can 2.
  • Now slide your spatula into the gap (between the glass and the LCD block) and slide it carefully while heating the outline. Be careful not to press your spatula to avoid damaging the tablecloth of the buttons on the bottom. < SPyear >
  • Once the window is loose, you in.can raise it 90 degrees to the chassis main.
  • The touch glass of Wiko Cink can 2 is finally filed. If it is cracked or the touchscreen responds properly, you can replace it with another all new.
  • Let's move on now to the reassembly of your Wiko Cink can 2. To do this, you have to follow our tutorial in the opposite order.

Those products may also interest you


Accessories

Delivery Date

Order before 14 h

for delivery between 18/04 and the 21/04/24

Approximate date using Suivi GRATUIT moreInfo
Close