Screen glass touch Black Wiko Ozzy

PMFR6086

New

Screen glass touch Black Wiko Ozzy.

More details

This product is no longer in stock

3,38 € tax incl.

Data sheet

Pre-gluing of the glass: No: Not systematic: It is necessary either to recover the old one, or to buy adhesive "quarter rolls 2mm"
For what type of breakdown? Typical Touch Problems: Touch sensitivity fault, the keypad does not respond but the picture works well, can not enter the PIN code, screen that remains frozen on the logo when starting.

More info

Change the touchscreen glass to an Ozzy Wiko < /.H2 >

If the touch glass of your Wiko Ozzy is cracked or the tactile feature is no longer this < strong >touch replacement glass This will allow you to put it back to nine. The following tutorial will explain, step by step, how to change yourself the glass of your Wiko Ozzy. The < strNGO >opening Tools for Wiko sets < /stRong >are also available in our shop.../ span >

Remove the back cover of the Wiko Ozzy < /.H3 >

  • Before proceeding to the touch your Wiko Ozzy window replacement, room-mobile technicians advise you for security reasons to turn it off.
  • Do carefully lever using your spatula plastic in order to file the < stroNG >back cover of your Wiko Ozzy .
  • The back cover protecting the battery from your Wiko Ozzy is now filed.

Drop the internal frame of the Wiko Ozzy < /.H3 >

  • Reuse your plastic spatula to remove the battery of the Wiko Ozzy its housing.
  • Slide the SIM card from its location as shown in the video. < /span >
  • Take off the white label of gararranty located top right of your device. < /span >
  • Unscrew the 4 screws which are used to maintain the internal chassis of Wiko Ozzy.
  • Slide a spatula between the internal frame and the block your Wiko Ozzy screen then gently pry to separate them. < /span >
  • The internal chassis of your Wiko Ozzy is now filed.

Drop the rear camera Wiko Ozzy

  • Disconnect the water of the rear camera your Wiko Ozzy < /.strong >the motherboard.
  • Using your plastic spatula, carefully remove the rear camera from its housing. Use precision tweezers to put the camera back of Wiko Ozzy.
  • The rear camera to your Wiko Ozzy is now filed.

Drop the motherboard of the Wiko Ozzy < /.H3 >

  • Disconnect the water of the touch screen using your plastic spatula. < /span >
  • Still use your plastic spatula to detach the clips that keep the motherboard in place. < /span >
  • You can now file the motherboard of your Wiko Ozzy all sSecurity. < /span >

Replace the glass of the Wiko Ozzy

  • This is! The < strong >touch glass of your Wiko Ozzy is now dismantled. If necessary, you can replace it with another brand new available at very affordable prices on our shop online.
  • For the reassembly of your Wiko Ozzy, simply repeat the previous steps in reverse order

Delivery Date

Order before 14 h

for delivery between 30/03 and the 02/04/24

Approximate date using Suivi GRATUIT moreInfo
Close