Intel San Diego touchscreen display or xolo X900 View larger

Touch screen display for Intel San Diego or Xolo X900

PMFR3762

New

Touch screen Intel San Diego or Xolo X900 US version (not compatible with European models unless coupled with US chassis)

More details

In stock

13,43 € tax incl.

Data sheet

Pre-gluing of the glass: No: Not systematic: It is necessary either to recover the old one, or to buy adhesive "quarter rolls 2mm"
For what type of breakdown? Typical Touch Problems: Touch sensitivity fault, the keypad does not respond but the picture works well, can not enter the PIN code, screen that remains frozen on the logo when starting.

More info

Touch screen in spare parts to repair my Intel San Diego or Xolo X900

We advise you to take a complete block LCD + touch because this repair is difficult (separation of the blocks risking to break the LCD)/ P>

US version (not compatible with European models unless coupled with US chassis).

Adaptation of the US version on chassis Orange:

1- It is necessary to file the edges of the contour, and to rectify the angle of the 4 corners, with much precautions because the frame is very fragile.

Modification X900 US vers orange step1

It is then necessary to apply a little liquid seal in order to fill the micro gaps, to perfect the waterproofing, to allow to dry and to sand with the aid of a soft abrasive (ideally a mini millstone) when the joint is dry.

 

X900 US modifié vers X900 Europe

If the repair seems too difficult contact:

Daniel FAYOLLE

www.msi78.com

contact@msi78.com

Initial author of this tutorial and whom we thank for its indications.

Those products may also interest you


Delivery Date

Order before 14 h

for delivery between 10/05 and the 13/05/24

Approximate date using Suivi GRATUIT moreInfo
Close